The kits I supply contain all of the hardware needed for the conversion (as pictured), a set of Aquila Thundergut strings and a quality 3 band active preamp EQ. Of course, I also supply a full set of detailed instructions, supported by many colour photographs which explain how to build one of your own.
How it works: You supply a quarter or half (recommended) size classical guitar.
Search your shed or nip down to the hardware store to pick up these tools (minimum requirement):
* Drill, selection of wood bits (inc 25mm)
* A padsaw or close-quarters hacksaw
* A flat general purpose or wood file
* A mini-file kit or fine sandpaper
* A screwdriver with a small cross-head end
* An old towel or rag.
--Soldering equipment is NOT required--
Then order a kit, put a morning or afternoon aside, and get started! If you need some advice, or encouragement - send an email to the address on the instructions for all the help you need.
How it works: You supply a quarter or half (recommended) size classical guitar.
Search your shed or nip down to the hardware store to pick up these tools (minimum requirement):
* Drill, selection of wood bits (inc 25mm)
* A padsaw or close-quarters hacksaw
* A flat general purpose or wood file
* A mini-file kit or fine sandpaper
* A screwdriver with a small cross-head end
* An old towel or rag.
--Soldering equipment is NOT required--
Then order a kit, put a morning or afternoon aside, and get started! If you need some advice, or encouragement - send an email to the address on the instructions for all the help you need.
