The kits I supply contain all of the hardware needed for the conversion. This '+' kit adds an active 4 band EQ - with an extra 'presence' control over the standard 3 band eq; a hard synthetic bone nut; pre-lacquered sapele string support and a black sapele saddle brace (which ensures the nut isnt over extended in shallow bridge slots). Of course, you also get a set of Aquila Thundergut strings and a full set of detailed (but simply written) instructions, supported by many colour photographs.
How it works:
You supply a quarter or half (recommended) size guitar.
Search your shed or nip down to the hardware store to pick up these tools (minimum requirement):
* Drill, selection of wood bits (inc 25mm)
* A padsaw or close-quarters hacksaw
* A flat general purpose or wood file
* A mini-file kit or fine sandpaper
* A screwdriver with a small cross-head end
* An old towel or rag.
Order a kit, put a morning or afternoon aside, and get started!
If you need some advice, or encouragement - send an email to the address on the instructions for all the help you need.
How it works:
You supply a quarter or half (recommended) size guitar.
Search your shed or nip down to the hardware store to pick up these tools (minimum requirement):
* Drill, selection of wood bits (inc 25mm)
* A padsaw or close-quarters hacksaw
* A flat general purpose or wood file
* A mini-file kit or fine sandpaper
* A screwdriver with a small cross-head end
* An old towel or rag.
Order a kit, put a morning or afternoon aside, and get started!
If you need some advice, or encouragement - send an email to the address on the instructions for all the help you need.
